| DESCRIPTION | UNITS | LZ 400V |
| CAPACITY | Center Height | mm | 200 |
| Swing Over Bed | mm | 400 |
| Swing Over Cross Slide | mm | 225 |
| Swing Over Carriage Guideways | mm | 390 |
| Distance Between Centers In Accordance With DIN 806 | mm | 1000 |
| Width of Bed | mm | 260 |
| Height of Bed | mm | 260 |
| Spindle Height From Floor | mm | 1130 |
| SPINDLE | Spindler Nose Bayonet DIN 55027 | | Size 6 |
| Spindle Bore Dia | mm | 62 |
| Inside Diameter of Collet (Draw -in ) | mm | 26 |
| Inside Diameter of Collet (Push -out ) | mm | 60 |
| I.D Taper Bore Similar to DIN 228 | | ME 70 |
| Chuck Size | mm | 200 |
| Run Out | mm | 0.003 |
| Max Diameter of Face Plate | mm | 355 |
| TOOL SLIDE | Cross Slide Travel | mm | 210 |
| Top Slide Travel | mm | 115 |
| Swivel Range of Top Slide | Grad | +180-180° |
| Cross -Section of Cutting Tool (QCTP ) | mm | 20x 20 |
| Lead Screw Pitch | mm | 6 |
| TAIL STOCK | Quill Stroke | mm | 110 |
| Quill Diameter | mm | 60 |
| Taper Bore in Accordance With DIN 228 | | MT 4 |
| DRIVE | Spindle Drive | | Infinitely Variable AC Drive |
| Speed Range | U /min | 150-3000 |
| Motor Power | Kw | 4 |
| FEEDS & | Longitudinal Feeds | mm /U | 0.025-2.0 |
| Cross Feeds | mm /U | 0.012-1.0 |
| Metric Threads | mm | 0.2-14 |
| Whit Worth Threads | ΤΡΙ | 80-1.5 |
| Module Threads | Module | 0.1-7 |
| Diameter Pitch Threads | DP | 200-3.5 |
| MACHINE SIZE | Length x Width x Height | mm | 2100x 1080x1520 |
| Weight | Kg | 1800 |
